Table of Contents
Advertisement
Disconnect the syringe and connect the tube to the Ink
18
Dumper.
Turn on the Sub Power SW while pressing the Left, Right
19
and Down keys to enter Service Mode.
Select the corresponding Supply Pump from [I/S MENU]
20
> [I/S CONTROL] and select [SUPPLY], and press the
[ENTER] key.
Ink is supplied to the Sub Tank until it becomes full.
* The number of the Supply Pump is given from 1 to 6
starting from the leftmost black ink Pump.
(The black ink Pump is [SUPPLY PUMP1], and the next
one is [ SUPPLY PUMP2]...)
When finishing the ink supply, [CANCELED BY INK
21
FILL] displays.
To let out the air that was brought in with the new Pump,
perform powerful cleaning three times for the head
corresponding to the replaced Pump.
* Select the same number as the Pump which performed
[SUPPLY].
Tube
Ink
Dumper
[
], [
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
CANCELED BY
CLEANING
POWERFUL
POWERFUL
1
3-28
], [
] + POWER ON
[MENU] key
I/S MENU
I/S CONTROL
[
] [
I/S CONTROL
SUPPLY PUMP1
[
] [
SUPPLY PUMP1
SUPPLY
[ENTER]
INK FILL
CLEANING
[
] [
]
]
]
Advertisement
Table of Contents
