Turn on
Printer Main Power SW.
2
Turn on Sub Power SW while pressing the Left, Right and
3
Down keys to enter Service Mode.
Select [I/S MENU] > [I/S CONTROL] > [PRESS PUMP 1- 6] >
4
[CLOSE] and press [ENTER] key.
This prodcedure is to prevent the ink from
flowing back to Sub Tank when disconnecting
the tube from Head.
Loosen Adapter Screw and disconnect the tube from Head.
5
Do not remove Tube Joint Adapter from Ink Tube.
<Rear View>
[
], [
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
Adapter Screw
5-23
Printer Main Power SW
], [
] + POWER ON
[MENU] key
I/S MENU
I/S CONTROL
[
I/S CONTROL
PRESS PUMP1
[
PRESS PUMP1
CLOSE
[ENTER]
] [
]
] [
]