GE VersaMax IC200PWR001 User Manual page 50

Wiring for a Barrier-Style I/O Carrier (IC200CHS001)
Field Wiring
Terminals
Each terminal on a Barrier-Style I/O Carrier accommodates one or two solid or
stranded wires from AWG #22 (avg. 0.36mm
(avg. 2.1mm
inserting two wires in the same position, the wires must be the same size and
type (solid or stranded).
The I/O carrier can accommodate current levels up to 2 Amps per point or 8
Amps per each power and ground, and a voltage range of up to 264 V AC.
Voltage transients up to 300 V AC will not damage the carrier.
For a Barrier-Style I/O Carrier, recommended terminal torque is 0.37 to 0.50 ft-lbs.
The label provided with the module can be folded and inserted in the module's
transparent door.
Terminal Numbering for a Barrier-Style I/O Carrier
GFK-1504N Chapter 2 Installation
H B
G
C 7
D
F
2
cross section). Use copper wire rated for 90 degrees C. When
A13 A15 A16 A17
A14
A7 A8 A9 A11 A12
A10
A1 A2 A3 A5
A4
8 2
3
4
6
2
cross section) to AWG #14
A18 B13 B15 B16 B17
B14
B7 B8 B9 B11 B12
B10
A6 B1 B2 B3 B5
B4
2
B18
B6
2-23