GE VersaMax IC200PWR001 User Manual page 344

Analog input module IC200ALG262 provides an interface to 8 current inputs.
The module receives power from the backplane power supply. No external
power source is required for module operation. Power for the user's
transceivers must be supplied from an external source.
Intelligent processing for this module is performed by the CPU or NIU. The
module provides 8 words of analog input data.
LED Indicators
The green OK LED is ON when backplane power is present, internally
generated field power is functioning properly, the module has been configured,
and the module has been recognized on the backplane.
Diagnostics
The module reports a Loss of Internal Power fault for field-side circuits.
The module reports an Open Wire fault for each channel, when in 4-20mA
mode.
Configuration Parameters
A jumper on the carrier terminals can be used to configure 4-20mA or 0-20mA
input ranges. With no jumper installed, the module accepts 4-20mA input
signals. With a jumper installed, the module accepts 0-20mA input signals.
GFK-1504N Chapter 10 Analog Input Modules
Analog Input Module, 15 Bit Differential Current 8 Channels
IC200ALG262
OK
IIC200ALG262
ANALOG INPUT 15BIT
CURRENT DIFF 8CH
1234567 831
10
10-29