Setting Up The Instrument; Packaging; Checks - Metrohm 882 Compact IC plus Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Eluent aspiration tubing (6.1834.080)
Connected to the high pressure pump.
3 MSM eluent inlet capillary
Labeled with in.
5 Detector inlet capillary
7 Regeneration solution aspirating capil-
lary (6.1803.020)
9 MSM regeneration solution inlet capil-
lary
Labeled with regenerant.
11 Rinsing solution aspirating capillary
(6.1803.020)
13 MSM rinsing solution inlet capillary
Labeled with rinsing solution.
15 Sample aspirating capillary
(6.1803.040)
Connected to the injection valve.
17 PEEK pressure screw, short
(6.2744.070)
19 Pump tubing connection (6.2744.180)
With safety device and filter, for connecting
capillaries to the outlet side of the peristaltic
pump.
3.4

Setting up the instrument

3.4.1

Packaging

3.4.2

Checks

882 Compact IC plus – Anion
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
2 Column input capillary (6.1831.150)
Connected to the injection valve.
4 MSM eluent outlet capillary
Labeled with out.
6 Detector outlet capillary
8 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the regen-
eration solution.
10 MSM regeneration solution outlet
capillary
Labeled with waste reg.
12 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the rinsing
solution.
14 MSM rinsing solution outlet capillary
Labeled with waste rins.
16 Sample outlet capillary (6.1803.040)
Connected to the injection valve.
18 Tubing olive (6.2744.034)
For connecting capillaries to the aspiration
side of the peristaltic pump.
20 Coupling (6.2744.040)
3 Installation
￭￭￭￭￭￭￭￭ 15