Change The Passcode; Change Passcode - Xerox COPYCENTRE M20I User Manual

Change the Passcode

This procedure is used to change an existing passcode or to enter a passcode after Passcode
Protect has been enabled.
1
2
3
4
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Press the [Machine Status] key.
Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
Select [Change Passcode] using
the Navigation Keys and press
[Enter].
Enter the existing passcode and
press [Enter].
This will be blank if you have just
enabled Passcode Protection
Enter the new passcode and
press [Enter].
System Admin Tools
[Passcode Protect]
System Admin Tools

[Change Passcode]

Enter Passcode:
Page 9-23