Xerox COPYCENTRE M20I User Manual page 59

Clone
Auto Fit
2 Sided 1-1 Sided
Use to produce
1 or 2 sided copy
output from 1 or
1-2 Sided
2 sided originals.
Long
1-2 Sided
Short
2-1 Sided
Long
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Use to print multiple
images on a single sheet
of paper. The number of
images produced is
determined automatically
based on the original
image size.
Only available using the
Document Glass, ensure
the Document Feeder is
empty.
Use to reduce or enlarge
the image to fit the paper
size automatically.
Only available using the
Document Glass, ensure
the Document Feeder is
empty.
Use when originals are
printed on 1 side and 1-
sided copies are required.
Use when originals are
printed on 1 side only and
2 Sided copies, with the
conventional "head to
head" layout are required.
Use when originals are
printed on 1 side only and
2 Sided copies, with the
"head to toe" layout are
required.
Use when originals are
printed on both sides, with
the conventional "head to
head" layout, and 1 sided
copies required.
Press [Copy].
Press [Reduce/Enlarge].
Using the Navigation Keys, select [Clone] and
press [Enter].
Clone appears on the display.
Press [Copy].
Press [Reduce/Enlarge].
Using the Navigation Keys, select [Auto Fit] and
press [Enter].
Auto Fit appears on the display.
Press [Copy].
Press [2 Sided].
Use the Navigation Keys to select the option
required and press [Enter] to save the selection.
If necessary, use the [Scan Side 2] option to scan
side 2. Position side 2 on the Document Glass
and select [Yes] then [Enter] to scan side 2.
Continue the procedure until all the originals have
been scanned.
Select [No] when all the originals have been
scanned, and press [Enter].
Page 3-7