Xerox COPYCENTRE M20I User Manual page 61

Paper Supply Status
Map
Use to select the
paper source.
Bypass
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
The Status Map identifies
which paper tray is
selected, when a paper
tray is empty and when an
error occurs.
Document
Feeder Error
Bypass
Paper
Jam
Tray 1
Tray 2
Use to notify the machine
the type of paper loaded
in the Bypass Tray.
Press [Copy].
To select a paper tray, press the [Paper Supply]
key until the required tray is lit on the Status Map.
The Status Map identifies which paper tray is
selected, when a paper tray is empty and when an
error occurs. The Status Map has a light for each
paper tray.
Each time the [Paper Supply] key is pressed, a
different tray is selected and a green light displays
to indicate the selected tray. When two tray lights
display together, the Auto Tray Switching feature
is active. This enables the machine to switch to a
different tray if the current tray runs out of paper.
If a paper tray is empty, the light will flash and if
enabled, an error tone will sound.
If the Bypass Tray is selected the Paper Type
option displays. Use the Navigation Keys to
select the Paper Type being loaded and press
[Enter].
If using the Bypass, remember to load the
required stock.
Page 3-9