Table of Contents
Advertisement
DISPLAY
Non-Xerox Toner Cart
Operation Not Assigned
Line Busy
Line Error
LSU Error
Memory Full
No Answer
Poll Code Err.
Polling Error
No Developer Cartridge
Page 11-12
MEANING
You have used an
unauthorized toner
cartridge.
The machine has no job
to handle.
The remote fax did not
answer.
Your machine cannot
connect with the remote
machine, or has lost
contact because of a
problem with the phone
line.
A problem has occurred in
the LSU (Laser Scanning
Unit).
The memory is full
The remote fax machine
has not answered after
several redial attempts.
You have used an
incorrect poll code.
The remote fax machine
you want to poll is not
ready to respond to your
poll.
Or, when setting up to poll
another fax machine, you
have used an incorrect
poll code.
The toner cartridge is not
installed.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
SOLUTION
You must use a Xerox approved cartridge.
Try again. Contact recipient to ensure remote
machine is functioning correctly.
Try again. If the problem persists, wait an hour
or so for the line to clear, then try again.
Or, turn the ECM mode on. Refer to "Fax Setup
Options" on page 6-19 for more information.
Try Power Off / Power On. Refer to "Powering
On the Machine" starting on page 2-14. If the
problem still persists, please call for service.
Either delete unnecessary documents,
retransmit after more memory becomes
available, or split the transmission into more
than one operation.
Try again. Contact recipient to ensure remote
machine is functioning correctly.
The remote operator should know in advance
that you are polling and have the fax machine
loaded with the original document.
Enter the correct poll code.
Install the toner cartridge. Refer to "Toner
Cartridge" on page 10-5.
Advertisement
Table of Contents
