Change The Passcode - Xerox 4118P - WorkCentre B/W Laser User Manual

To protect more Functions select [Yes], press [Enter] and repeat steps 4 and 5.
6
To end, select [Done] and enter the passcode.
If you enabled Passcode Protection, refer to "Change the Passcode" starting on page 8-8
7
to enter the new passcode.

Change the Passcode

This procedure is used to change an existing passcode or to enter a passcode after Passcode
Protect has been enabled.
Press the [Machine Status] key.
1
Using the Navigation Keys select [System Admin Tools] and press [Enter].
2
If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
Select [Change Passcode] using the Navigation Keys and press [Enter].
3
Enter the existing passcode and press [Enter].
Enter the new passcode and press [Enter].
4
Confirm the new passcode and press [Enter].
5
Page 8-8
System Admin
Reports
This will be blank if you have just enabled Passcode Protection
Protect All
Allow All
Protect All
Allow All
Xerox WorkCentre 4118 User Guide