Test Print or Scan
To ensure the Xerox WorkCentre M20 or M20i has been installed correctly a test print or scan
should be submitted from the Workstation.
Test Print
Perform the following steps:
1
Open a document on the Workstation.
Select the Xerox WC M20 Series as the printer to which the document will be sent.
2
Print the selected document on the device and verify that it prints correctly.
3
The installation process is now complete.
Test Scan
Open the Twain compliant application being used to scan documents.
1
Follow the instructions provided in "Scan" starting on page 8-1 to scan a document and
2
verify that it scans correctly.
The installation process is now complete.
Page 2-28
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide