Table of Contents
Advertisement
Auto Reduction
Prefix Dial
Auto Report
ECM Mode
Redials
Ring to Answer
Redial Term
Ringer
Junk Fax Setup
Secure Receive
Fax Auto Tray
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
On
Use to activate the machine performing an
automatic reduction for over-sized fax jobs.
Off
Use to de-activate the automatic reduction.
Over-sized jobs are printed on two pages.
Up to 5 digits
The number entered will be added to the
beginning of each fax sent.
On
Use to enable a report listing details about the
previous 50 communication operations.
Off
On
Use to switch on ECM for all transmissions.
Transmission time may be increased when
ECM is enabled.
Off
Use to switch off ECM.
[0 - 13]
Use to set the number of redial attempts.
[1 - 7]
Use to set the number of rings before
answering.
[1 - 15]
Use to set the number of minutes between
redial attempts.
Off
Use to set the ringer volume.
Low
Med
High
On
Use to restrict receipt of junk mail by only
allowing faxes to be received from remote
Off
machines registered on your machine.
On
Use to set the default option for receiving
secure faxes.
Off
Print
Tray 1
Selects the default paper tray for fax jobs.
Tray 1 & Tray 2
All
Page 6-23
Advertisement
Table of Contents
