Dialing Methods - Xerox COPYCENTRE M20I User Manual

Dialing Methods

There are several methods which can be used to enter a fax number or a group of fax number.
The following table identifies and explains all the dialing methods available.
DIALING METHOD
Keypad Dialing
Use when entering the remote fax
number using the Numeric Keypad.
Speed Dialing
Use to access a fax number which
has previously been stored in the
machine's memory.
Group Dialing
Use to access a group of numbers
which have previously been stored in
the machine's memory.
Page 6-6
Load the originals and select the [Fax] key.
Use the Numeric Keypad to enter the telephone number of the
remote fax machine.
Press [Start] to send the fax.
Load the originals and select the [Fax] key.
Program the features required for the job.
Press [Speed Dial] and enter the Speed Dial number (1-200).
The name appears and the original is scanned into memory
ready for sending.
If the original is loaded on the Document Glass, the display
asks if you want to send another page. Select [Yes] to add more
originals, or [No] to begin transmission. Press [Enter].
The fax number stored in the speed dial location will be dialed
automatically and the fax is sent.
Load the originals and select the [Fax] key.
Program the features required for the job.
Press [Group Dial] and enter the Group Dial number (1-200).
When the required number displays, press [Enter].
The original is scanned into memory.
If the original is loaded on the Document Glass, the display
asks if you want to send another page. Select [Yes] to add more
originals, or [No] to begin transmission. Press [Enter].
The machine automatically sends the fax to each of the
numbers in the Group.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
INSTRUCTIONS