Table of Contents
Advertisement
Machine Setup Options
OPTION
Tray 1 Size
Tray 2 Size
Bypass Size
Power Save
Time Out
Stamp RX Name
Alarm Sound
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
SETTINGS
LTR / A4 / LGL / Folio
LTR / A4 / LGL / Folio
LTR / A4 / LGL / Folio /
A5 / Statement
On
Off
15 / 30 / 60 / 180
Seconds
Off
On
Off
On
Off
DESCRIPTION
Use to set the default paper size for Tray 1.
Paper Size options are Letter, A4, Legal (216 x
356 mm / 8.5 x 14 inch) or Folio.
Use to set the default paper size for Tray 2.
Paper Size options are Letter, A4, Legal (216 x
356 mm / 8.5 x 14 inch) or Folio.
Use to set the default paper size for the Bypass
tray. Paper Size options are Letter, A4, Legal
(216 x 356 mm / 8.5 x 14 inch), Folio, A5 or
Statement.
If feeding media smaller than A4/Letter through
the bypass tray, the setting can remain set at
A4, Letter or Legal size.
When copying onto a paper size smaller than
A4/Letter, the printed image may be offset and
not reproduce correctly, even when Auto Fit is
selected.
Use to enable the Power Save feature. If On is
selected, set the period of time the machine
waits before Power Save is activated. Choose
between 5, 10, 15, 30 or 45 minutes.
Sets the number of seconds the machine
remains idle before the current job settings are
reset back to the default settings. Use Off to
deactivate the option.
Set to On to enable sender information, the
machine ID, the page number, the date and time
of reception and the reduction rate of the image
to be printed on each page of each received
transmission. The information is printed on the
bottom edge of each page.
Set to On to enable an alarm sound when an
error occurs or a fax communication ends.
Page 9-3
Advertisement
Table of Contents
