Using The Global Address Book - Xerox COPYCENTRE M20I User Manual

Using the Global Address Book

The Global Address Book has to be set up to retrieve E-mail address from a LDAP. The Global
Address Book works in a similar way to the Local Address Book, except you cannot add, edit
or delete users.
1
Load the originals and press the [E-mail] key.
2
To access the Global Address Book press the [Address Book] key and select [Global].
3
Begin to enter the E-mail address in the To: field.
when a few characters have been entered, press [Enter]. The machine will search for E-
mail addresses on the LDAP server which match the characters entered.
If you have not entered enough characters, a message displays requesting more
characters.
A list of E-mail addresses which match the characters entered displays.
Using the Navigation Keys, scroll through the list of addresses and find the correct
address. Then press [Enter].
4
Use [Add] to enter another address if required, the maximum number of addresses you
can enter is 10.
After entering all the addresses, select [Done] and press [Enter].
5
Enter the Sender's name and select other features as required.
Press [Start] to activate the job.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 5-13