Unmounting Machine From Tractor; Mounting And Adjustments; Tine Mounting; Daily Maintenance - SaMASZ UNO 410 Operator's Manual

5.9. Unmounting machine from tractor

CAUTION:
When unmounting, make sure there is no person in between the rake and the
tractor.
To unmount the rake from the tractor:
Set the machine onto an even, stable ground,
Support the machine with the support legs and protect with safety pin,
Turn the tractor's ignition off and take the key out,
Protect the tractor against free runaway,
Dismount the PTO shaft and place it on a PTO shaft holder, which is standard-delivered
with the machine,
Detach the machine from the tractor.
6.

MOUNTING AND ADJUSTMENTS

6.1. Tine mounting

Tines should be mounted as provided in Fig. 23.
WARNING:
- Use only tines recommended by manufacturer.
- Check condition of tines before each operation. Worn or damaged tines
should be replaced immediately.

6.2. Daily maintenance

After daily completion of operation the following should be done:
inspect all visible external parts and assemblies for their connection; tighten all loosen screws
and replace any worn or damaged parts,
after each operation wash the rake with water under pressure,
remove grass and mud from the machine,
examine condition of rotors,
Operator's manual
Fig. 23. Mounting rake tines
- 23 -
Rotary rake UNO