SaMASZ UNO 410 Operator's Manual page 23

Operator's manual
Rotary rake UNO
Down
Up
Fig. 19. Trolley adjustment clearance
up
down
~
3 ½
"
up
down
~
½
"
Raking height adjustment
Fig. 20.
lower the rake once again,
set rear 3-point linkage links for such height (H) that front ground following wheel remains
firmly on the ground and there is clearance on tiller's cylinder (Fig. 21) in order to enable
ground following by front rotor,
if need be, (e.g. for constant hitch height on tractor) adjust the clearance with knob P,
connect PTO shaft extension of the tractor rpm (unless only one extension was taken out) or
connect the complete PTO shaft,
- 21 -