Removing Clogging And Jams; Unmounting Machine From Tractor - SaMASZ DUO 680 Operator's Manual

Fig. 36. Risk of machine falling caused by momentum M when operating on slope

5.12. Removing clogging and jams

When operating the mower pay attention to variable conditions on field, which may influence the
mower clogging and jams, such as: terrain unevenness, height and density of grass as well as other
objects in the grass (stones, branches, piles of soil). In order to avoid clogging and jams, operating
speed should be adjusted to the mentioned conditions.
In case of machine blockage caused by wrapped material, set the machine on a flat surface,
remove excess material using sharp tool. After clearing the machine check if nothing has been
damaged.
To remove any clogging it is obligatory to disconnect the drive and the motor, take out the ignition
key. When eliminating any clogging on the machine, use also safety means for operator, so protective
gloves and tight wear.
NOTE!
Removing clogs and jams while the machine is in operation can lead to the
accident!

5.13. Unmounting machine from tractor

NOTE:
When dismounting, make sure there is no person in between the machine
and the tractor.
To unmount the machine from tractor:
set the machine on an even, stable ground,
❑
support the machine with the support leg and protect with cotter pin,
❑
turn the tractor's ignition off and take the key off,
❑
secure the machine against moving by placing wedges at wheels,
❑
36
DUO
M
F
DOUBLE-ROTOR RAKE OPERATOR'S MANUAL
DWUKARUZELOWA