Safety Precautions - SaMASZ UNO 410 Operator's Manual

Tab. 2. Recommended PTO shaft for UNO rake
Rake Power Length
HP ft. in
UNO 410
4' 3"-6'
UNO 440 35
UNO 470
NOTE:
Optional extra equipment should be ordered separately.
PTO shafts of other brands with equivalent parameters could be used after first obtaining
SaMASZ permission.
4.

SAFETY PRECAUTIONS

The following precautions are for your safety. They must be read carefully and
followed by every person who operates or maintains the machine. Failure to follow these safety
precautions could result in serious injury or death to the operator, maintenance person or
bystanders and property damage to the machine and surrounding property.
Safety Signal Words
This manual and the safety labels attached to this equipment utilize signal words that signify
safety hazards with different levels of severity. Below are the words used and the definitions for
these words:
• DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury
• WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury
• CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury
• NOTICE is used to address practices not related to physical injury
Operator's manual
Torque
Nm
460 8G4R140CEWR7001
1"
Fig. 4. PTO shaft lubrication points. Mounting directions
Symbol Clutch
Overload
M=800Nm
- 5 -
Rotary rake UNO
Manufacturer Remarks
Bondioli &
Pavesi
-