Pump Mounting - Raven ICD Sidekick Pro Installation Manual

C 3
HAPTER
FIGURE 9. Fourth Tank Frame Base Installed.
2. Install the tank cage to the fourth tank frame. Two of the bolts will install into the original tank base frame and
the remaining two will install into the fourth tank frame.
3. Sandwich the four tank retaining brackets (P/N 107-0172-590), with the flanged side supporting the fourth tank
cage, between the outside tank cages and the central tank cage.
FIGURE 10. Fourth Tank Frame Brackets Installed
Fourth Tank Retaining Brackets
4. Ensure that one hardware assembly will be above the tank cage cross brace.
5. Install the 1/4" bolt, nut, and washer to secure with 1/4" hardware.
6. Verify the proper alignment of the installed frame components to ensure there is no interference with the
machine.
7. Tighten all the hardware installed to this point.

PUMP MOUNTING

1. Place the pump mounting bracket(s) (P/N 116-0159-527) on the inside of the base bracket(s) on the lower cross
tube.
12
Fourth
Tank
Cage
Tank
Cages
Restraining Bracket
Orientation
ICD Sidekick Pro Injection for Case Trident Installation Manual
Fourth Tank Frame
Base Hardware
Locations
Hardware Location