Table of Contents
Advertisement
C
3
HAPTER
FIGURE 31. Trident Rinse Mounted
Existing Rinse Tee
on Machine
2. Remove the existing M220 cap from the existing tank tee. Reuse the clamp and gasket to secure the rinse valve
plumbing assembly to the rinse tank tee.
3. If needed, assemble the rinse tee for dual pump stations as shown below. Use pipe thread sealant on the
threaded joints.
FIGURE 32. Assembling Dual Pump Station Rinse Tee Fittings (Dual Pump Station System Only)
3/4" Hose Barb
to 1/2"NPT
To Rinse Valve
Assembly
MIXER INSTALLATION
PLUMBING MIXER ASSEMBLY
1. Assemble the mixer inlet and outlet plumbing as shown below using the fittings, clamps, and gaskets provided.
24
3/4" MNPT to 3/4"
Hose Barb Elbow
1/2" NPT to 3/4"
Hose Barb
Elbow
ICD Sidekick Pro Injection for Case Trident Installation Manual
3/4" Cap
3/4" 3-Way
Ball Valve
To Pump 1
1/2" NPT Tee
To Pump 2
Advertisement
Table of Contents
