Tee Plumbing Assembly - Raven ICD Sidekick Pro Installation Manual

C 3
HAPTER
FIGURE 22. Single Pump Recirculation Valve Assembly

TEE PLUMBING ASSEMBLY

1. Configure the tee assembly according to the tank/pump configuration using the pictures below.
FIGURE 23. Trident Tee Plumbing Left (Used with Three and Four Tank Configurations)
M100 Elbow
M100 Tee
3/4" MNPT to 1"
Hose Barb Elbow
2. Use the provided 1/4" U-bolts and hardware to secure the tee assembly to the lower tank support strap near
the appropriate tanks.
20
Calibration and
Recirculation
Valve Assembly
Thread Check Valve Into Here
M100 to 1"
Hose Barb, 45°
To Pump 1 Fill
Assembly
ICD Sidekick Pro Injection for Case Trident Installation Manual
Remove 1/2" Hose Barb to 1/2"
FNPT Fitting and Replace with 1/2"
Valve Assembly
M100
Clamps
and
Gaskets
3/4" FNPT to M100
Install Valve
Assembly
1/2 NPT to Hose Barb
Elbow
From Tanks
1 and 2
M100 to 1" Hose
Barb, 45°