Table of Contents
Advertisement
C
3
HAPTER
FILL PLUMBING ASSEMBLY AND INSTALLATION
1. Assemble the fill plumbing components based on tank quantity and configuration. The next few images shows
different pump and tank assembly configurations based on needed tank and pump quantities.
FIGURE 13. Trident Fill Assembly for One Pump and Two Tanks
3/4" MNPT to 1" Hose Barb Elbow
3/4" Nipple
3/4" 3-Way
Ball Valve
1" to 3/4"
Reducing Nipple
1" Banjo Dry Disconnect
NOTE:
When assembling a single pump, dual tank configuration, loosely mount the mounting bracket and
jam nuts to the dry disconnect fittings prior to installed the dry disconnect fittings to the plumbing
assembly.
FIGURE 14. Trident Fill Assembly for Two Pumps and Two Tanks
To Pump 1
3/4" MNPT to 1"
Hose Barb
3/4" 3-Way
Ball Valve
14
To Pump
3/4" Street Elbow
From Tank 1
ICD Sidekick Pro Injection for Case Trident Installation Manual
From Tank 1
3/4" Nipple
From Tank 2
3/4" MNPT to 1"
Hose Barb
Jam Nut
3/4" MNPT to 1"
Hose Barb Elbow
From Tank 2
To Pump 2
1" to 3/4" Reducing
Nipple
Jam Nut
1" Banjo Dry
Disconnect
Advertisement
Table of Contents
