Install The Gauge Wheels; Gauge Wheel Mounting Locations - Raven AutoBoom Installation Manual

C 3
HAPTER

INSTALL THE GAUGE WHEELS

GAUGE WHEEL MOUNTING LOCATIONS

Wheel mounting locations may be influenced by the boom configuration. Determine the appropriate location for
mounting the wheels on the boom, ensuring the wheels will not interfere with or be damaged while folding or
unfolding the booms. The wheels should be mounted outside of the boom fold, but inside the boom breakaway.
Mount the Gauge Wheels
NOTE: The appearance of the wheel axles may vary.
1. Remove the nuts from the right wheel axle (P/N 063-0130-585)
2. Place the wheel (P/N 322-0131-003) on the right wheel axle.
3. Align and place the hub retainer bracket (P/N 107-0171-617) over the wheel.
4. Reinstall the lug nuts on the wheel axle to secure the wheel.
FIGURE 22. Gauge Wheel Mounting Bracket Installed
5. Secure the wheel mounting bracket (P/N 116-0159-707) to the front of the right boom using four 1-5/16" W x 2"
L x 3/8" thread U-bolts (P/N 107-0171-612) and eight 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
26
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
Buhler Versatile SX280 AutoBoom® Installation Manual