Node Mounting Locations - Raven SmarTrax Installation Manual

Chapter 3
Node Harness Installed
FIGURE 2.
Mount the SmarTrax node (P/N 063-0173-228) on the node mounting bracket (P/N 107-0171-947) using
3.
three 3/8"-16 nylon insert lock nuts (P/N 312-4001-109).
Insert the two large, rectangular connectors of the node harness (P/N 115-4001-087) into the correct ports
4.
of the node, tightening the bolts on the harness connectors to secure the connections.

Node Mounting Locations

Node Mounting
FIGURE 3.
When choosing the location for the SmarTrax node, consider the following points:
•
Mount the SmarTrax node inside the machine's cab on a flat, level surface for proper performance and
cable connection.
•
One of the six numbered direction arrows on the node must be oriented in the direction of forward vehicle
travel, one arrow pointing straight up, and two of the arrows parallel to the ground.
Note:
Make a note of the number of the arrow that is oriented in the direction of forward vehicle travel.
This number will be needed during the SmarTrax calibration process.
10
John Deere 7X20-7X30, 8X00- 8X30, 9X00, 9X20-9X30 Series Steering Ready SmarTrax™ Installation Manual
Direction Arrows
Any two arrows must
be parallel with level
ground
Mounting Tabs