Xantrex XFR 2800 Operating Manual page 78

Remote Operation
Remote Analog Programming of Output Voltage and Current Limit
Table 4.2 Power Supply Settings for Different Programming Sources
Output Output Current Limit Programming Source
Voltage
Programming
0-5 Vdc
Source
0-5 Vdc SW1:
set 3 and 4
open.
J2: jumper 1 to
3 and 2 to 3.
0-10 Vdc SW1:
set 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-5 k Resistor SW1:
set 1 closed,
3 and 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-10 k Resistor SW1:
set 1 closed,
4 open.
J2: jumper 1 to
3 and 2 to 3.
None (Front SW1:
Panel Control) set 4 open.
J2: jumper 2 to
3.
76
0-10 Vdc 0-5 k Resistor
SW1: SW1:
set 3 open. set 2 closed, 3
J2: jumper 1 to and 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 1 to 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed, set 1 and 2
3 open. closed,
J2: jumper 1 to 3 and 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed. set 1 and 2
J2: jumper 1 to closed, 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 2 to 4 open.
3. J2: jumper 2 to
3.
0-10 k Resistor
SW1:
set 2 closed, 3
open.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 2 closed.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 1 and 2
closed, 3 open.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 1 and 2
closed.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 2 closed.
J2: jumper 2 to
3.
Operating Manual for XFR 2.8kW Series Power Supply
None (Front
Panel Control)
SW1:
set 3 open.
J2: jumper 1 to
3.
SW1:
default settings.
J2: jumper 1 to
3.
SW1:
set 3 open,
1 closed.
J2: jumper 1 to
3.
SW1:
set 1 closed.
J2: jumper 1 to
3.
SW1:
default settings.
J2: no jumper.