Installation And Configuration; Introduction - Xantrex ENET-XFR Operating Manual

2

Introduction

Installation and
Configuration
The Ethernet/RS-232 Interface
local distributor or service center can also install the interface,
especially for use in a previously-purchased supply already on site. You
must then configure the Interface-enhanced supply for your system
using the "Basic Setup Procedure - Ethernet" on page
"Basic Setup Procedure - RS-232" on page
To use this product, you must have the following equipment:
• a Xantrex XFR DC output power supply
• computer-based communications software package
is usually installed at the factory. Your
2–11.
2–10, or the