Baud Rate Selection; Table 2-6 Jumper J2 Settings For Baud Rate - Xantrex ENET-XFR Operating Manual

Installation and Configuration

Baud Rate Selection

2–18
Serial transmission sends and receives data in bit streams at fixed bit
rates. Both the computer and the interface must have the same bit rate
setting for proper communication. The default baud rate is 9600. We
recommend that you do not change this setting. If the setting must be
changed, use Table 2-6
need to remove the cover to change any jumpers. See
Jumpers" on page 2–8.

Table 2-6 Jumper J2 Settings for Baud Rate

B a u d R a t e B 3
9600 closed
4800 open
2400 closed
1200 open
600 closed
300 open
150 closed
75 open
to select the correct jumper positions. You will
B 2 B 1
closed closed
closed closed
open closed
open closed
closed open
closed open
open open
open open
"Changing Internal
TM-XR9B-01XN