Ethernet
Communications
Ethernet
Connection
Connecting to a Network
Connecting Directly to your Computer
TM-XR9B-01XN
There are two options for controlling your XFR power supply via
Ethernet
- "Connecting to a Network" or "Connecting Directly to your
Computer." The first option is to connect the power supply to a network,
and control the unit from your computer which is also connected to the
network. The second option is to connect the XFR directly to your
computer's network interface card (NIC). This bypasses the need for an
existing network.
All that is required to connect your XFR to a network is a straight through
CAT 5 network cable and an available network port.
To connect your XFR directly to your computer you will need a cross-
over CAT 5 network cable. You will also need to check your network
settings on your computer to ensure that you are using a static IP address.
Check with your IT department for assistance.
Ethernet Communications
2–13