Proper Environment - MICRO-EPSILON scanCONTROL 29 Series Operating Instructions Manual

Safety
1.5
- Protection class for sensors: IP 65 (only applies in the case of connected output connectors or installed
- Temperature range:
- Ambient pressure:
- Humidity:
Optical paths during operation are excluded from the protection class. Contamination of the paths causes
impairment or failure of the function.
Use only shielded lines or original cables from the accessories program for the power supply connection or
the outputs.
Also observe the assembly and installation
The IP 65 protection class is a specification that is limited to protection from dust and water.
Oil, steam and emulsion effects are not included in this protection class and must be evaluated separately.
scanCONTROL 29xx

Proper Environment

protective caps)
ƒ Operation:
ƒ Storage:
0 ... +45 °C (+32 ... +113 °F) (with free air circulation)
-20 ... +70 °C (-4 ... +158 °F)
Atmospheric pressure
5 - 95 % (non condensing)
instructions, see 5.
Page 9