MICRO-EPSILON scanCONTROL 29 Series Operating Instructions Manual page 43

Operation of the Sensor with a PC
The measuring field can be restricted by omitting complete matrix areas in order to suppress interfering im-
age ranges.
The following measuring fields are used in the demonstration program, see Chap. 6.2.
Name
Large
Standard
Small
Fig. 24 Measuring fields used
Measuring field and measuring range must be clearly differentiated in practical use. The measuring field is
related to the matrix and the measuring range is related to the measuring object (the object space).
Both do not have to match on account of the optical mapping and the definitions.
i
Characteristics of the sensors:
- a laser line with 20° aperture angle (measuring range 25 mm) or 25° ope aperture angle (measuring
- The receiver has a smaller aperture angle (view angle) than the laser line.
- Centered measuring field (symmetrical to the center axis).
- The high resolution sensor image matrix evaluates 1280 x 1024 pixels. The measuring field geometry is
- Reference for the distance (Z-axis) is the lowest body edge of the
- Use of the GigE-Vision standard. The description is included in the documentation of the scanCONTROL-
scanCONTROL 29xx
Index
0
2
7
The „Standard" measuring range and the „Standard" measuring field are not congruent. The minimum
dimensions can be found in the dimensional
ranges 50 mm and 100 mm).
fixed.
Configuration Tools.
drawings, see 5.1.
sensor, see 5.1.
Page 43