MICRO-EPSILON scanCONTROL 29 Series Operating Instructions Manual page 14

Laser Safety
Fig. 5 Laser warning sign and laser label, scanCONTROL 29xx
i
In addition, the following information label must be attached to the laser output on the sensor
Fig. 7 Sensor with laser labels
Operation of the laser is indicated visually by the LED on the
The housing of the optical sensors may only be opened by the
scanCONTROL 29xx
If both warning labels are covered over when the unit is installed, the user must ensure that supplemen-
tary labels are applied.
scanCONTROL
Fig. 6 Only for USA
sensor, see 3.3.
manufacturer, see 9.
housing:
Page 14