Proper Environment - MICRO-EPSILON scanCONTROL 30 Series Operating Instructions Manual

Hide thumbs Also See for scanCONTROL 30 Series:

Table of Contents

Safety

1.5

Proper Environment

- Protection class

ƒ Sensor:

IP67 (applies only when connected output connectors or protective caps)

- Temperature range

ƒ Operation:

0 ... +45 °C (+32 ... +113 °F) (with free air circulation)

ƒ Storage:

-20 ... +70 °C (-4 ... +158 °F)

- Ambient pressure:

Atmospheric pressure

- Humidity:

5 - 95 % (non condensing)

The protection class does not apply for the optical sections during operation as their soiling / contamination results in adversely affect-

ing or failure of the function.

Only use shielded cables or original cables from the range of accessories for the connection to a power supply and for the outputs.

Note also the assembly and installation instructions, see Chap. 5.

The IP67 protection class is a specification which is limited to the protection with respect to dust and water. Oil, steam and emulsion

penetration are not included in this protection class and must be tested separately.

scanCONTROL 30xx

Page 9

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the scanCONTROL 30 Series and is the answer not in the manual?