Notes On Ce Marking; Intended Use - MICRO-EPSILON scanCONTROL 29 Series Operating Instructions Manual

Safety
Protect the cable against damage.
> Failure of the measuring device
Only plug in or disconnect attached devices when disconnected from the power supply.
1.3
The following apply to the scanCONTROL 29xx measuring system:
- EU directive 2014/30/EU
- EU directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant appli-
cable harmonized European standards (EN). The measuring system is designed for use in industrial environ-
ments.
The EU Declaration of Conformity is available to the responsible authorities according to EU Directive,
article 10.
1.4
- The scanCONTROL 29xx measuring system is designed for use in industrial and laboratory areas.
- It is used for
- The sensor must only be operated within the limits specified in the technical
- The sensor must be used in such a way that no persons are endangered or machines and other material
- Take additional precautions for safety and damage prevention in case of safety-related applications.
scanCONTROL 29xx

Notes on CE Marking

Intended Use

ƒ Profile measurement
ƒ Length measurement
ƒ Quality monitoring and inspection of dimensions
goods are damaged in the event of malfunction or total failure of the sensor.
data, see 3.2.
Page 8