Delta PCS100 Maintenance Manual page 88

Removing an AC SPD
1. Open the front door. See "Opening a Front Door" on page 20.
2. Remove the safety cover. See "Removing a Safety Cover" on page 34.
3. Loosen the captive screws securing the wires.
4. Pull out the wires from the AC SPD.
5. Push down on the top of the AC SPD release tab with your finger. As the AC SPD releases, lift
the bottom of the AC SPD.
6. Remove the AC SPD from the rail.
Maintenance Manual
SPD 1
Figure 98. Disconnecting the Wires
Figure 99. Removing an AC SPD
76
L1 L2 L3
PEN
Maintenance