Delta PCS100 Maintenance Manual page 48

7. Locate the safety cover bracket on the left side of the cabinet, see the following figure.
8. Remove the screws securing the safety cover bracket.
9. Remove the bracket.
10. Starting with the AC extension rod, locate the hex screw on the side of the extension rod, see
the following figure.
11. Insert a hex-key wrench and remove the hexagon screw. This allows the extension rod to be
free from the securing slot.
12. Gently pull the AC extension rod straight out.
13. Once removed, place the extension rod on a clean work surface.
Maintenance Manual
ON
OFF
Figure 42. Removing a Safety Cover Bracket
Figure 43. Removing the AC Extension Rod
36
Maintenance
ON
OFF