Delta PCS100 Maintenance Manual page 168

4. Use a vacuum cleaner with an antistatic hose and nozzle to clean the filter. A normal vacuum
cleaner creates static discharges.
The filter can also be cleaned with water. Make sure the filter is completely dried before reusing
it in the system.
Installing an Air Intake Filter
1. Position the filter over the cage and slide the air intake filter into place.
2. Align holes on the air filter cage with the butterfly nuts on the rear door.
3. Slide down and secure the butterfly nuts to lock in place.
4. Close the rear door. See "Closing a Rear Door" on page 28.
Maintenance Manual
Figure 236. Installing an Air Intake Filter
Figure 237. Installing an Air Filter Cage
156
Maintenance