Powering Off The Pcs100 - Delta PCS100 Maintenance Manual

Powering off the PCS100

To power off the system, see the following guidelines:
1. Check the system status on the front display panel to ensure that the system is not in a SoftS-
tart or Run state.
2. If the system is in SoftStart or Run state, push the PCS OFF button on PCS HMI Tool to switch
the PCS system to Standby mode.
3. Turn the AC and DC switches on the front door to the OFF state as shown in Figure 15.
DC DISCONNECT
OFF
Figure 15.
Maintenance Manual
Figure 14. PCS HMI Tool - PCS ON/OFF Control
DC DISCONNECT
ON
ON
OFF
Disengaging the AC and DC Switches (OFF State)
AC DISCONNECT
ON
AC DISCONNECT
ON
OFF
OFF
18
Maintenance