Delta PCS100 Maintenance Manual page 69

4. Continue to hold the housing in place and insert a hexagonal nut at the top of the housing and
tighten it halfway. This prevents the heat exchanger from falling off.
5. Once in place, continue from the bottom of the housing and inserting the remaining nuts.
6. Tighten all the nuts to secure the heat exchanger in place.
7. Align the data cables to the ports and insert them. Make sure they are flush in the ports.
8. Connect the cables and secure the captive screws.
Maintenance Manual
Figure 75. Securing the Hexagonal Nuts
V D
- 4 8
M M
C O
V D
- 4 8
M M
C O
Figure 76. Connecting the Cables
57
C
C
Maintenance