Igbt Driver Board (B Board) - Delta PCS100 Maintenance Manual

3. Align the hole on the wires with the holes on the DC softstart relay.
4. Secure the wires with screws.
5. Connect the cable.
6. Installing a safety cover. See "Installing a Safety Cover" on page 37.
7. Close the front door. See "Closing a Front Door" on page 22.

IGBT Driver Board (B Board)

WARNING!
!
Read the "Safety Instructions" on page ix on the first at the beginning of this manual before
performing any service on the components. Ignoring safety instructions may result in injury,
damage or death.
CAUTION!
!
D
ANGEROUS VOLTAGE LEVELS MAY BE PRESENT FOLLOWING DISCONNECTION
CABINET UNTIL A REASONABLE PERIOD OF TIME HAS ELAPSED
D ,
EATH SERIOUS INJURY
Maintenance Manual
Figure 167. Installing the Wires
Figure 168. Connecting the Cable
,
OR HARDWARE DAMAGE CAN RESULT IF CAUTION IS NOT TAKEN
116
Maintenance
. D
O NOT OPEN THE
.
.