Delta PCS100 Maintenance Manual page 67

5. Locate the data cables on the heat exchanger and loosen the captive screws securing them.
6. Pull the cables out to disconnect them.
7. Locate the hexagonal nuts on the parameter of the heat exchanger. Begin with the nuts on the
bottom of the exchanger and move upwards to remove all the hexagonal nuts.
You may need to hold the heat exchanger in place to prevent it from inadvertently falling off the
front door.
Maintenance Manual
Heat Exchager
Figure 71. Disconnecting the Cables
Figure 72. Removing the Hexagonal Nuts
C
V D
- 4 8
M M
C O
C
V D
- 4 8
M M
C O
55
Maintenance