Delta PCS100 Maintenance Manual page 173

Maintenance
5. Insert the IGBT HSK cover in the cabinet. Make sure the holes on the cover align with the bolts
on the cabinet.
6. Securing the IGBT HSK cover with screws.
7. Secure the IGBT HSK cover with hexagonal nuts.
Figure 242. Installing an IGBT HSK Cover
8. Connect the cable to the IGBT fan module.
9. Align the temperature sensor cable with the hole on the IGBT fan module.
10. Secure the temperature sensor cable with a screw.
Figure 243. Disconnecting the Cables
11. Close the rear door. See "Closing a Rear Door" on page 28.
Maintenance Manual 161