Delta PCS100 Maintenance Manual page 43

Opening a Control Box
The control box swings open to reveal the components on the rear side and the top internal section of
the cabinet.
1. Open the front door. See "Opening a Front Door" on page 20.
2. Loosen the captive screws securing the control box.
3. Grasp the control box and swing it open.
Closing a Control Box
Before closing the control box, make sure the area is free of any cables that may have come loose.
1. Close the control box cover and tighten the captive screws.
2. Close the front door. See "Closing a Front Door" on page 22.
Maintenance Manual
Figure 35. Opening a Control Box
Figure 36. Closing a Control Box
31
Maintenance