Delta PCS100 Maintenance Manual page 64

8. Hold the cable attached to the fan module and insert it in the channels of the cable tray. Make
sure the head of the cable sits in the middle of the cable tray.
9. Locate the remaining cable end and connect it to the cable already inserted in the channel.
10. Once connected, lower the unsecured cable through into the tray. Make sure there is no excess
cable outside of the cable tray.
11. Tuck any excess cable in the tray.
12. Place the end cap over the tray and press it in to secure. Make sure the cover is flush in the tray.
No part of the cover should extend past the sides of the tray.
13. Install the safety cover. See "Installing a Safety Cover" on page 37.
14. Close the front door. See "Closing a Front Door" on page 22.
Maintenance Manual
Figure 68. Connecting a Fan Module Cable
Figure 69. Installing a Bracket Cover
52
Maintenance