Delta PCS100 Maintenance Manual page 47

5. Slide the safety cover until the slits in the cover are flush with the extension rods. The extension
rods must have access to pass through the slits without interference.
CAUTION!
!
W
HEN SERVICING THE
R . C
ODS AUTION IS RECOMMENDED TO AVOID INJURY OR DAMAGE WHEN THE
ARE PROTRUDING FROM THE CABINET
6. Grasp the safety cover and carefully slide it out through the extension rods. Pay attention to the
position of the extension rods to avoid the possibility of injury.
Maintenance Manual
S C
AFETY OVER MAKE SURE TO KEEP AWARENESS OF THE
.
Figure 41. Sliding out the Safety Cover
35
Maintenance
E
XTENSION
E R
XTENSION ODS