Electrical Installation, Control Terminals - Danfoss VLT AFE 302 Operating Instructions Manual

How to Install
4.4.4 Electrical Installation, Control
Terminals
To connect the cable to the terminal:
1. Strip insulation of 9-10mm
2.
Insert a screwdriver
3. Insert the cable in the adjacent circular hole.
4 4
4. Remove the screwdriver. The cable is now
mounted to the terminal.
To remove the cable from the terminal:
1.
Insert a screw driver
2. Pull out the cable.
1)
Max. 0.4 x 2.5mm
1.
32
1)
in the square hole.
1) in the square hole.
9 - 10 mm
(0.37 in)
2.
3.
MG.33.X2.02 - VLT
®
VLT Active Front End AFE 302 Operating Instructions Liebherr
®
is a registered Danfoss trademark