Weight Information; Mechanical Installation; Tools Needed; General Considerations - Danfoss VLT AFE 302 Operating Instructions Manual

How to Install

4.2.6 Weight Information

Crate Crate
Length Weight
(mm) (kg)
600 120
800 130
1200 160
4 4
1200 160
1600 260
2000 320
2400 380
2800 440
Table 4.1 Weight Based on Shipping Package Crate Size

4.3 Mechanical Installation

The mechanical installation of the frequency converters must
be prepared carefully to avoid additional work during the
installation. Review the mechanical drawings to become
familiar with the space demands.

4.3.1 Tools Needed

To perform the mechanical installation the following tools
are needed:
•
Tape measure
•
Wrench with relevant metric sockets (7-17mm)
•
Extensions to wrench
28
®
VLT Active Front End AFE 302 Operating Instructions Liebherr
(lbs) Cabinet (lbs) Content
Weight (kg)
(kg)
252 57 126 159
273 76 168 306
336 115 253 459
336 115 253 318
546 153 337 612
672 191 421 765
798 229 505 918
924 267 590 1071
MG.33.X2.02 - VLT
(lbs) Total (lbs)
Package
(kg)
351 336 729
675 512 1116
1012 734 1601
701 593 1290
1349 1025 2232
1687 1276 2780
2024 1527 3327
2361 1778 3875
•
Lifting bar to lift the unit (rod or tube Ø 20mm)
able to lift minimum 400kg.
•
Crane or other lifting aid to place the frequency
converter in position

4.3.2 General Considerations

Space
Ensure proper space above and below the frequency
converter to allow airflow and cable access.
Wire access
Ensure that proper cable access is present including
necessary bending allowance. As the IP00 enclosure is open
at the bottom, the cables must be secured to the back panel
of the enclosure where the frequency converter is mounted,
i.e. by using cable clamps.
®
is a registered Danfoss trademark
Package Contents
Cabinet and D Frame frequency converter
Inverter Modules Qty. 2
Inverter Modules Qty. 3
600mm Cabinet Qty. 2, D Frame frequency
conveters Qty. 2
2 x 800mm Cabinet with Inverter Modules
Qty. 2
1200mm Cabinet with Inverter Modules
Qty. 3, 800mm Cabinet with Inverter
Modules Qty. 2
2 x 1200mm Cabinet with Inverter Modules
Qty. 3
1200mm Cabinet with Inverter Modules
Qty. 3, 2 x 800mm Cabinet with Inverter
Modules Qty. 2