CYBEX Arc Trainer 626A Owner's Manual page 61

Determine distance
1. Verify foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates. Begin striding.
3.
Press and the hold the Scan/Hold
A beep signifies the first screen of the Statistics menu.
4.
Menu navigation is done two ways:Up/Down - The UP
scroll up and down in the statistics menu.
The Statistics menu includes: Miles/Km, Hours, Starts, Battery and Error log.
5. The first menu item is Miles/Km.
6. Record Distance.
7. Navigate to menu item Hours.
8. Record Hours.
9. Exit Statistics menu by pressing the Pause or STOP key.
First 500 Miles (800 KM)
Follow this procedure to ensure the belts are tensioned properly and in good condition.
1. Remove access cover. (See previous procedure Remove Access Cover)
2. Pull down and roll each belt to examine the condition. If a belt has cracks or appears worn, it must
be replaced immediately by a qualified service technician.
3. Attach access cover. (See previous procedure Attach Access Cover)
Every 5000 Miles (8000 KM)
Check drive belts for tension and wear. (See procedure First 500 Miles)
Move unit and vacuum underneath. Lift the rear of unit and roll it back from its present position. Vacuum
underneath and return unit to normal position.
Clean inside unit.
1. Remove access cover. (See previous procedure Remove Access Cover)
2. Using a vacuum cleaner attachment or hand vacuum, clean the exposed components.
3. Remove dirt and debris from internal components.
4. Using a dry cloth, wipe all exposed areas.
5. Attach access cover. (See procedure Attach Access Cover)
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
or Display option
and DOWN
Page 61 of 83
and DOWN keys for 3 seconds.
keys allow you to