Belts - CYBEX Arc Trainer 626A Owner's Manual

As Needed
Vacuum any dust or dirt that might accumulate under or around the unit. Cleaning this area should be
done as often as indicated in the Service Schedule.
Clean Console
• Spray a mild cleaning agent on a clean cloth.
• Clean the console, accessory tray, and cup holder with a damp cloth.
Clean Base
• Spray a mild cleaning agent on a clean cloth.
• Clean the base of the unit with a damp cloth.
Contact Heart Rate Grips
Clean the grips using a cloth dampened with a cleaning solution containing rubbing alcohol.
Contaminants, such as hand lotions, oils or body powder, may come off on the contact heart rate grips.
These can reduce sensitivity and interfere with the heart rate signal. It is recommended that the user
have clean hands when using the contact heart rate.
Drive Belts
Remove front access cover
1. Remove screws securing front access cover using a Phillips screwdriver.
2. Remove access cover.
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
Do not spray cleaning solution directly on the console. Direct spraying could
cause damage to the electronics and may void the warranty.
Burn hazard. Do not touch flywheel until cool.
1
2 Front access cover
Page 58 of 83
Description
Screw
Qty.
4
1