626At/627At - CYBEX Arc Trainer 626A Owner's Manual

5. Install the coax cable to the mounting plate on the front of the unit using a 14 mm open end wrench.
6. Plug the Ethernet or HDMI cable into the coupler on the front of the unit.
Visually inspect unit
1. Remove any packing material from unit.
2. Examine the unit to ensure that the assembly is correct and complete.
Assembly Procedure 626AT/627AT
Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure
to return, replace, or reorder parts.
The words "left" and "right" denote the user's orientation.
Verify you have received the correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Verify paint color matches what was ordered.
Tools Required
• Phillips screwdriver
• Stubby Phillips screwdriver
• 3/16" Allen wrench (included)
• 7/32" Allen wrench (2) (included)
• 9/16" Open end wrench (2)
Verify parts list shown below
Item Quantity
1 1
2 1
3 2
4 1
5 1
6 1
7 1
8 1
9 1
10 1
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
Part Number
Varies
Varies
12090-322
770A-316
770A-317
770A-318
625A-312
625A-313
770A-324
625A-310
Base with covers attached
Console assembly
Foot pad
Base, Accessory tray
Cover, Top, Accessory tray
Cover, Bottom, Accessory tray
Cover, Rear, Top, Right
Cover, Rear, Outer, Right
Cover, Rear, Inner, Right
Cover, Rear, Top, Left
Page 26 of 83
Description